Quick Quotes | Phone | Location | Email

Large Format Printing

·  Largest industrial printer bed size

· Able to print up to one meter in each dimension

·  Excellent for casting and mold making

·  Low residual ash for burn out processes

·  Rapid turnaround of sand cast molds

LFP Guidelines

Please note that these are are guidelines, not hard-and-fast rules. Follow these, and you should be in pretty good shape. We'll let you know if we see any problems with your design.

Parameter Inches Milimeters
Maximum Part Size 39.4 x 23.6 x 19.7 1000 x 600 x 500
Minimum Supported Wall Thickness 0.080 2.00
Minimum Unsupported Wall Thickness 0.060 1.50
Minimum Supported Bosses 0.080 2.00
Minimum Unsupported Bosses 0.060 1.50
Minimum Embossed Detail (Height and Width) 0.015 0.40
Minimum Engraved Detail (Height and Width) 0.015 0.40
Clearance Between Parts/Bodies 0.020 0.50

Standard Material Properties

This data is provided for the convenience of our customers. It does not on its own represent a sufficient basis for any part design, nor does it provide any agreement about or guarantee the specific properties of a product or part or the suitability of a product or part for a specific application. It is the
responsibility of the producer or customer of a part to check its properties as well as its suitability for a particular purpose. This also applies to any possible intellectual property rights as well as regional laws and regulations. The data are subject to change without notice.

PMMA Partikelmaterial (Acrylic Based Powder infused with Wax or Epoxy)

Property Value Units
Tensile Strength (Wax Infused) 4.3 MPa
Tensile Strength (Epoxy Infused) up to 25 MPa
Yield Point 1 %
Burnout Temperature (Wax) 600 - 700 °C
Residual Ash Content (Wax) < 0.02 - 0.03 %
Softening Temperature (Wax) 73 °C
Softening Temperature (Epoxy) 90-93 °C
Standard Layer Thickness 150 µm
X-Y Resolution 600 DPI
Accuracy 0.3 %