Quick Quotes | Phone | Location | Email

Scanning Packages start at $195 - Digitize, Redesign, Scale, Inspect and Replicate

 

Scanner Overview

The Geomagic Capture scanner creates mesh models by capturing multiple segments of a part from different angles that can be merged into a single digital recreation of the scanned part.

The ideal part for the Capture is approximately 8”X8”X8” and a matte white surface finish. Larger items up to 24”X24”X24” are possible, but anything much larger than that generally requires a large number of scans that bog down the software and often ends with a poor result. Items smaller than 3”X3”X3” may not suitable for our scanner, usually because they have features that are too small/thin for the capture to acquire.

 
3D-scanner-3D-Systems-Geomagic-Capture-front.jpg